Did you buy a new tool belt, but it is uncomfortable and very heavy?
Try to properly wear a tool belt, then you will not have trouble while working.
There are many options for solving the problem, and using braces is not the limit.
So, let me tell you how to properly wear a tool belt so that your work will become even more comfortable.
Is wearing a tool belt bad for your back and shoulder?
When you wear a tool belt on your back and shoulders all day, it creates a painful feeling under the influence of a constant weight on your shoulders.If you wear a belt every day, in the same way, it is definitely bad for your health.
Together with this, you can buy an additional mobile bag where most of your tools will be located. And for work, you can take the necessary tools, but not more than 10% of your total weight.
You can ease the burden of laying unnecessary tools aside, without buying a separate bag for them.
In my opinion, a wearing a tool belt on the back and shoulders may not be bad if you use soft straps and suspenders. This method allows you to redistribute the weight evenly and reduce the voltage.
Things to consider when buy your tool belt avoid pain
Before buying a tool belt, you need to think not only about how many tools you can take but also about whether you can. After all, the constant weight worsens your health day by day.
I propose to pay attention to some things of the perfect choice of a tool belt, which will help to avoid pain.
Using of suspenders
It is important that your potential tool belt would be a kit that includes suspenders. Undoubtedly, this choice will be qualitative, will help to distribute weight on all back, and not only on shoulders.
Option with several pockets
Many pockets divided into several compartments make your work not only more organized but also safe.
A couple of compartments and a lot of pockets in them will allow the tools to be distributed so that both compartments have approximately the same weight.
Have a space inside
A large space inside the hvac bag is simply necessary for the productive organization of work when each tool will have its place. The order will reduce the weight and severity of the tool belt.
Tool belt should have a leather belt
Consider this a rule or commandment, but your potential framing tool belt should have a leather belt that will provide high mobility.
The matter is that it is the leather belt has the option of adjusting the compartment by sliding.
Thus, you can change the position and weight of compartments, which will not give weight in only one place, it will distribute the weight.
Material is the foundation of the basis
Choosing a tool belt, you will certainly meet copies of polyester fabric, leather, suede, and nylon.
If you do not want your back to ache with pain, opt for flexible and durable materials such as nylon, leather, and suede. Yes, these materials are heavy initially, but keep a lot of weight afloat.
A soft nylon belt saves you from pain and anyone who uses it will tell you the same. But the nylon tool belt will be no less useful and will provide comfort.
Nylon tool belt has better stitching, and also do not make a low sag. It clearly keeps the tool belt along with the tools at the required level. Polyester linen is easy, but in time it will take place and every tool will gain weight.
How to Properly Wear a Tool Belt: Step By Step Guide
Imagine that my advice helped you to get a wonderful tool belt, which suits you 100%. But the most important is yet to come; you need to put your tool belt correctly.
To begin with, you need to attach the tool belt to the back of your trousers. The principle of fastening is simple, just pass the belt through the waistband of the trousers.
If you use suspenders, (and you must do this), then the braces should be located, crossing your back, and coming up to your chest. Then just attach the braces to the front side of the trousers.
Generally, it is all the stages of the installation of the tool belt, after which you can safely go to work. But to maintain the convenience in the future you need to twist the pockets back.
This method will make the use of the tool belt more comfortable. At the same time, change the position of the compartments after each task completed.
Yes, and remember that all the existing tools you do not need. Carry only the necessary tools and nothing superfluous, then the weight will not be enough to hurt you.
Also Read: Top Rated Electrician Tool Belt Reviews
Organize Tools into The Tool Belt For Maximum Usages
As I said, the proper organization of tools inside the tool belt can be very useful and relieve you of unnecessary heaviness and pain. Therefore, I will try to include you in the organizational process for maximum usages.
A separate place for everyone
Putting tools in only one pocket is a bad idea, as when walking and shaking the belt, all the tools will be mixed. Each tool must have its own place, where it will always be located.
For special tools, the back and front seats are allocated outside the pockets. For example, the tape measure should be in front, and any towels – behind. It should be so that any of your hands can get these tools.
Break down the tools into a hierarchy
All the important tasks will be performed by the main tools that the dominant hand pulls out. The maximum benefit can only be obtained if the tools are arranged in a hierarchy.
So, the important tools and means that you use most often should be on the side of your dominant hand, regardless of whether it is left or right.
For instance, a universal hammer, pliers, tools for carpentry, a knife for universal cutting, measuring instruments and something like that can be placed on the side of the dominant hand.
On the side of the auxiliary hand, instruments not of the first importance must be there, that you use not so often as instruments from the side of the dominant hand.
Auxiliary tools are all those that are used in addition to the main tools. It can be a couple of sets of nails of different sizes, a couple of screwdrivers of different sizes, a chisel for universal work, a pencil and so on.
Thus, you take the hammer from the side of the dominant hand, and the nails from the side of the auxiliary hand. It makes performing many tasks automatically and facilitates the workflow a few times.
Move the centers of heaviness constantly
Performing some tasks requires moving the center of heaviness to the other side. For example, in the case of wall cladding and any other work at height, it is necessary for safety reasons.
But besides, such a transfer will do you a favor at any time. After all, it will be easier for you to bend the back for a tilt, and also increase the level of comfort during long work.
As a rule, in the beginning, all masters of any profession place their pockets back, this puts pressure on the back. If it is a case of your habit too, then try to place pockets, tools, and fasteners in front.
An overloaded back gets pain very quickly, and some tools dig into the waist and interfere with the work. Move the instruments to any place, but make sure that the back is never overloaded.
Special Position During Actions
Organize the position of the tool belt pockets on the sides to the left and to the right to take actions such as walking or lifting more comfortable and safe.
In addition, only the necessary tools must be in the individual pockets of the tool belt. If you are going to go up, do not place pockets at the back.
Why should I wear a belt with suspenders?
But first, let’s define why a belt for tools with suspenders is necessary.
Imagine that you have to repair something all day. You prepared a set of tools for performing tasks.
The compressed pain in the back is bound to catch you at the end of this working day because you overloaded your back all day. However, suspenders can save your position.
By installing suspenders, you distribute the total weight of tools evenly. It helps prevent a sharp pain from overwork.
Suspenders will allow you to make a useful tool belt for the magnificent invention of a person as well as the wheel.
Just imagine that all the necessary tools are in place, you do not need time to extract them and besides, it is not hard. There is no doubt that you will become the most productive master in the workplace.
In general, the tool belt with suspenders should be used in cases where hands are occupied, and the body is in an uncomfortable position.
Suspenders are a very useful thing not only for those who work on the ground but also for those who spend all their work at the best.
A filled tool belt can outweigh the unnecessary side and a normal workflow becomes dangerous. Suspenders protect you and the pockets of the strap for tools so that nothing should slip.
But even suspenders can sometimes become the culprits of the occurrence of pain. Problems arise when you have incorrectly installed braces, and they do not perform their basic function.
How to wear a tool belt with suspender?
Tool belt with suspenders should be installed in the same way as an ordinal tool belt. It is enough just to push the belt through the loops on the pants and tightly close the buckle without pressing your waist.
Then the suspenders should be carried through the back and to the chest and fasten them on the front of the trousers. It is important that the suspenders and belt do not hang to the rings but are in a comfortable state.
After this simple installation, you can proceed to a uniform loading of the pockets of your tool belt. The organization of the space inside the pockets should take into account the fact that fewer instruments must be on the auxiliary side.
If the work requires constant inclinations, turn the belt so that its pockets are behind, so the tool will not crash into the side.
And if the work goes on top, try to release the front part of the body from contact with the tool and move the belt to the side. Suspenders not only reduce the load, transferring some weight to the shoulders but also improve back support, anyway.
Conclusion
And yet tool belt can be safe and not have a detrimental effect on the health of your back if you do it right. And you know a correct wearing tool belt is not difficult!
It is enough just to leave everything in its place, not to be a shopaholic and to have only the most necessary tools for effective work. In turn, a reasonable placement of tools inside the tool belt will help make your day more fruitful.
Leave a Reply