As any person who is a do it yourself enthusiast knows, drill machines are essential pieces of equipment that have virtually no replacement.
Their use is widespread and non-negotiable and must be performed well if the user is to feel any satisfaction.
People who have owned drills for the longest time and know a bit about them know that there are so many brands of these tools that to choose one over another is a very hard thing.
When the constraint is added further that the drill must cost cheap, then the task becomes even much harder. A user must know the things to look out for in addition to the cost.
The user who has little knowledge on drills ought to read on to find out more about these kinds of drills and what works and what doesn’t.
Cheap drills are even more of a menace if one is trying to find the perfect one to choose from and that is why a keen user has to pay attention on this best cheap drill reviews.
Best Cheap Drill Reviews in 2018
The following seven are well researched and have been known for quite a while to be perfect brands if one is looking for the best standards of work.
1. Black and Decker BDEDMT Matrix AC Drill Driver – 4.0 Amp, 11 Position Clutch SettingsThe first drill comes with a very high recommendation and is well regarded by all.
The drill is very powerful, and that in itself is an immense advantage. In addition to this, however, the device is also a known power save that will ensure it uses your power at a very minimum rate to give you the best of both worlds.
The shock that is usually generated by the use of these devices is adequately absorbed here meaning that the user will feel very safe while using it.
This cheap drill offers ultimate control features such as variable speed and adjustable components. All these ensure that the device is easy to control and use.
Ease of Use
The drill has no complicated procedures and standard will come with a manual providing all the information that a user needs to operate the device successfully.
- 0-1200 RPM
- Cheap and most popular matrix drill
- 4 AMP motor
- Supports 6 attachments
- Light weight and easy to move
- Powerful 11 position clutch settings
- No case. Comes with cardboard box.
2. Black & Decker DR260C Drill Review – 5.2-Amp, 3/8-Inch, 0-1,500 RPMOne of the premier brands of drills and one that is well known and respected by everybody. This drill has the following things about it.
The switch is easy to operate and while this may seem like a relatively normal thing, it is not.
With an easy switch, operation is made easier, and safety also assured while the drill is in use. This is a very important point.
- 5.2-Amp motor fit for metal, wood, plastic.
- Light weight and compact design
- Perfect for driving screw
- Comes with strong Screwdriving Bit
- 0-1,500 RPM
- No Carrying bag
- No Electric break
3. DeWalt DWD112 VSR Pistol Grip Drill with 8.0 AMP, 3/8 Inch, 0 – 2,500 RPMDEWALT has done it again with this versatile power drill.
I love every bit of this machine, and I’d recommend it to anyone who wants to achieve only the best result.
With its 8.0 amp motor, no task can be any difficult.
This power drill provides high performance in its heavy duty application, and the result will still impress you.
It features a soft grip handle design that provides maximum gripping surface and enhances comfort when you are holding the machine in your hands. This contributes to better control of the power drill.
The DEWALT DWD112 has an all ball bearing construction that ensures longer tool life and provides it with greater durability so that you can enjoy achieving the best with it for a longer period.
Variable Speed Reversing Trigger
This trigger is an excellent addition that greatly enhances the general functioning of the power drill. Besides its other attributes, it provides versatility in drilling and fastening applications.
- Has 8.0 AMP Powerful motor.
- 3/8 inch strong metal keyless chuck.
- All ball bearing construction.
- Durable and Easy to use.
- Light weight and compact.
- VSR trigger.
- There is no trigger lock.
- No case. You have to buy one.
4. Porter-Cable PC600D Variable Speed Drill – 6.5 Amp, 3/8-Inch, 0-2500 RPMAnother top quality cheap drill that offers a multitude of advantages to any buyer.
This cheap drill is one that has been designed to be used on some surfaces without any effects.
There are some drills that are made exclusively for one kind of surface and will not operate well on others. This is not that kind of drill.
The speed of the drill can be adjusted easily enough and different levels achieved by the user. The importance of variability cannot be overestimated.
- 6.0-Amp motor
- 0-2500 RPM
- Easily control using Lock-on button
- Metal Keyless 3/8″ chuck
- Change drill bits easily
- No drill bits. You need to buy separately
5. BLACK+DECKER DR560 1/2-Inch 7.0 Amp Drill/DriverThe fifth drill on this list is a true champion of cheap drills but is also one of the most efficient drills out there.
There are numerous added parts to this drill that together work to make it a very good and dependable drill.
These advantages are not to be found in most devices making this device truly one of its kind.
The device can be taken apart easily, and this provides the user with the options to either clean the device up on his own or use help. The interior can then be easily maintained.
The grip area is made of a perfect plastic that is hard enough but also soft enough to ensure good comfort while using the device.
The motor is the device that is responsible for making the drill bit then and therefore making the device work perfectly. The motor found here is one of the most powerful on these kinds of devices.
- Better bit retention
- 7 AMP motor
- 1/2″ metal chuck
- Effective side handle
- Comfort grip
- Lightweight compact design
- 0 to 900 RPM
- Comes without case or bag
- No torque dial
6. SKIL 6239-01 Cheap Drill Reviews – 5.5 Amp, 3/8″, Non-slip BumpersSKIL 6239-01 drill that will stay with the user for very long without any issues at all.
The SKIL 6239-01 is designed very simply and without any fuss. One of the advantages of these kinds of drills is that they can use in places that are difficult to reach by normal means.
The user can be able to choose from a number of colors as to which suits them best. These options are very important to a user.
The cord is long and able to provide electricity to the device without causing any inconvenience.
There is a manual, and the work of the user is to go through this manual in case of any complications arising from use. It is a very handy system.
- Mid grip soft design
- Strong keyless chuck
- Powerful 5.5 amp variable speed motor
- Variable speed trigger
- No drill bits
7. Black & Decker DR670 Hammer Drill – 6.0-Amp, 1/2 Inch, Side Handle, Depth RodLastly comes this device that is among the very best to be made.
It has the following features.
The device has a powerful enough mortar that can generate huge amounts of torque which enable the device to perform at its peak potential. This is an advantage that we cannot ignore.The device is covered with a rubber cover that also acts as a kind of shield against any intrusion.
The cord is made of materials that are can withstand a large amount of stress without breaking up. This is one of the main advantages of this device.
There are some drill bits that come with the device and can, therefore, be used when the initial one is not in good condition.
Best Cheap Drill Buying Guide
To be able to make the right choice during purchase, there are factors that every user should consider.
Obviously, because we are talking about cheap drills the cost has to come first. The user should check first of all check to see if the cost matches up to the value he or she expects of the device.
The user must be at the very forefront when making decisions about the device. If it is too costly and there are cheaper alternatives that could work just as well, then they should immediately be hired.
Ease of Use
The device that is easy to use the user will have a very easy time. There will be no need to go back and forth trying to find the perfect combination. A keen user will be able to look through these devices and choose that which is perfect.
This decision should not be taken lightly. Ease of use encompasses a wide range of considerations such as the way the device is manufactured to its tiniest details.
All these make the device either Easy to use or not. Something as simple as an ill-designed switch could have effects.
Surface of Use
The surface on which the device works on should also be a point of major consideration. The surface may be made of wood or even metal.
The user must be able to look at the specifications of the device and thus be able to see if it can be used on surfaces other than one. If this is the case, then this device is more preferred than those others.
The safety of the user comes first as always with these machines. The machine must have measures installed into it that will make it very safe to use.
This becomes especially important when the user is an amateur of sorts. He or she will find a very hard time finding the best. The user should therefore always put safety first.
The way the device is manufactured is what design deals with. The other devices that have designs that aren’t very pleasing to the eye should be avoided at all costs.
The user when they are going to buy these devices should know what to look for as far as a design on drills is concerned. Good design equals good workmanship, so users should strive for this.
The bit is the part of the drill that will most likely be used most. It will bear the brunt of the burden when it comes to handling any kinds of work.
The drill bit is the part that will come into contact with the surface most often and so must be able to manage the effects of surfaces that aren’t friendly to it.
You can achieve this through designing of drill bits with materials that are hard and durable and can withstand all kinds of exertion. The user must look at the materials and decide if they offer him the best options.
Accessories are added bits that may not be part of the main functioning of the device but still offer all the required services that a drill needs to operate well.
For instance, the drill might come with spare bits and these form part of the accessories bunch. Drills with more accessories are better than drills with less and a user must know to look for these kinds of drills and purchase them.
Handling has to do with the way the device feels on the hand. Devices with good handling feel comfortable and present no challenges while handling. Devices with poor handling are not the best and might even cause injury to the user.
Handling is determined by the designers and only they have the ability to affect the handling issues of the drill. With this in mind then it must be known that a user should look for drills with the best handling for easier work.
The grip is closely related to handling but is a bit different. The grip will affect how safe the device feels in your hand and also the level of control.
For devices with a good grip, the user is in total control when using the device and also the feeling of comfort and ease is assured with the presence of good grip. This is a very important qualifier before any buy.
As far as drills are concerned, you cannot go wrong with any of these seven. They are all very cheap and should be able to cost considerably cheaply even for the poorest of folks. Get yourself one of these right now.
These drills will obviously work differently in different situations and are therefore not all suited to the same tasks. Again it is the part of the user to look through them and find the one that suits his or her needs best.
1. 5 Best Electric Drill – In-depth Guide & Reviews
2. 5 Best Dewalt Drill Reviews – Top Rated Models Compared
3. Best Hammer Drill Reviews – 10 Top Products for Tough Concrete
4. 10 Best Power Drill Reviews – Expert’s Choice for Drilling!
5. 10 Best Lightweight Drill for a Woman – Boost Your DIY Skill